- November 25, 2014
- November 11, 2014
- November 4, 2014
Working with sliding shower door replacements can be problematic where it concerns the bottom track. During some renovation projects, the track can be found to be welded to the tub, which can be tricky to address.
To remove, the first step is to lift the sliding doors off of the head rail track and swing them out. Remove the screws holding the head rail to the side rail. Tap the head rail loose from the side rails using a rubber mallet. The side rails are usually bolted and caulked in place. Remove the screws (use Liquid Wrench or just drill them out if they are corroded) and pry the rails away from the wall. Be gentle so as not to loosen any tiles.
For more, download the full article.
This one-minute video promotes the apartment industry’s national advocacy event on March 17-18. Under the theme “One Industry. One Voice,” the video encourages people to be informed, get involved and...